Worldwide Shipping | Free Shipping over 25 EUR

Installation Guide

These tips and instructions can be used for all devices. The Application process is fairly easy, though should be done with patience and attention to detail. Please read these instructions completely before starting.

1. Clean your device and hands thoroughly before you start. Avoid using solvents or cleaners on the device, a soft cloth is best, and be sure it’s dry. Work in a well lit, clean and stable space.

2. Familiarize yourself with the smartfit pieces and where they go on your device by removing all unnecessary cut-out areas (camera and flash areas, buttons etc.). Be sure to peel all pieces from the backing paper slowly so the smartfit is not stretched or torn. 

NOTE: You can use the backing paper to assist you in application for any areas you do not yet want the smartfit to adhere to. 

3. Once you’re happy with the alignment of your skin, firmly press the smartfit to your device. Continue pressing and smoothing out the smartfit on the device,especially around the edges. You may wish to use a flat edge (credit card, ruler etc.) to assist you in smoothing out the skin. Repeat this several times. If small air bubbles form, don’t worry, the channeled adhesive allows for bubbles to be pressed and smoothed away – a flat edge makes this extra easy. 

NOTE: If you’ve opted for a Clear Case, now you’re ready to clip the case overtop of the skin.. You’ll notice there are clip-like areas. Firmly press these areas to your device – you’ll hear them click into place. For iPhones and Samsungs, carefully press the case to the device beginning in any corner area. Slowly repeat this for the remaining corner areas.

5. You’re done.

If you are still confused you can watch our Unboxing and Installation video for Galaxy S7 below.